High-Carbon Ferromanganese FeMn75
High-carbon ferromanganese alloying addition for steelmaking where manganese recovery and carbon limits must be balanced.
Grade selection profile
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
High-carbon ferromanganese alloying addition for steelmaking where manganese recovery and carbon limits must be balanced. Typical uses include steelmaking manganese alloying, foundry, welding consumable production. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.
Key characteristics
- Economical manganese source
- high carbon
- controlled phosphorus and silicon
Typical applications
- Steelmaking manganese alloying
- foundry
- welding consumable production
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Mn | 75.0 min | wt% | Typical value |
| C | 7.5 max | wt% | Typical value |
| Si | 2.0 max | wt% | Typical value |
| P | 0.2 max | wt% | Typical value |
| S | 0.03 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Bulk density | 1.3 | t/m3 | Lumps |
Specialty Alloys & Welding Materials