Specialty alloy grades
Start with the material system, compare grades, then check the required performance, product form, process and application.
Drill-Pipe Hardbanding Wire
Request hardbanding wire with the tool-joint material, deposition procedure, application requirements and inspection criteria.
ERNi-1 Pure Nickel Wire
Nickel welding wire for compatible nickel materials and specified dissimilar joints in corrosive service.
ER80S-Ni1 Low-Temperature Wire
Nickel-bearing low-alloy steel welding wire for joints where low-temperature toughness is a specified requirement.
View technical dataK20590ER80S-B2 (1.25Cr-0.5Mo) Wire
Chromium-molybdenum steel welding wire for compatible heat-resistant steel joints with controlled preheat and post-weld heat treatment.
D256 Austenitic Manganese Hardfacing
Austenitic manganese hardfacing consumable for impact-dominated wear where work hardening is part of the intended response.
ER70S-6 Carbon Steel Wire
Carbon steel welding wire with manganese and silicon deoxidizers for general fabrication.
View technical dataS308LER308L Stainless Wire
Low-carbon austenitic stainless steel welding wire for joining compatible stainless grades.
316L Stainless Steel Powder
Request 316L stainless steel powder against your process, particle-size distribution, chemistry limits, test methods and lot requirements.
Ni25 Self-Fluxing Powder
Lower-hardness nickel-base self-fluxing powder for fused coatings where machinability and corrosion resistance are important.
Ferrosilicon 75
Ferrosilicon alloying addition and deoxidizer for steelmaking and foundry operations.
View technical dataR30188Haynes 188
Cobalt-nickel-chromium-tungsten alloy for fabricated components exposed to high-temperature oxidation.
A-286 (GH2132)
Iron-nickel-chromium precipitation-hardening alloy for high-strength fasteners and elevated-temperature components.
Alloy 600 (UNS N06600)
Compare Alloy 600 (Inconel 600) bar, plate and seamless tube requirements by specification, dimensions, delivery condition and mill documentation.
Drill-Pipe Hardbanding Wire (300XT/WC type)
Carbide-reinforced hardbanding consumable for abrasive-wear protection, with casing-contact suitability confirmed for the specific product.
ERNiCu-7 Nickel-Copper Welding Wire
Prepare an ERNiCu-7 solid-wire or bare-rod enquiry with the parent alloy, welding process, diameter and packaging requirements.
ER80S-Ni3 (3.5Ni) Low-Temperature Wire
Nickel-bearing low-alloy steel welding wire for specified low-temperature steel joints; it remains iron-base despite its nickel addition.
View technical dataK30960ER62-B3 (2.25Cr-1Mo) Wire
Chromium-molybdenum steel welding wire for compatible pressure-equipment joints requiring a defined welding and heat-treatment procedure.
D642 High-Chromium Hardfacing
Chromium-bearing iron-base hardfacing consumable for specified metal-to-metal wear and erosion conditions.
E7018 Low-Hydrogen Electrode
Low-hydrogen covered electrode for compatible carbon and low-alloy steel fabrication.
View technical dataS309LER309L Stainless Wire
Austenitic stainless steel welding wire commonly considered for dissimilar stainless-to-steel joints and buffer layers.
17-4PH Stainless Steel Powder
Precipitation-hardening stainless steel powder for components requiring strength after an appropriate heat-treatment route.
Ni35 Self-Fluxing Powder
Nickel-base self-fluxing powder balancing coating wear resistance, corrosion resistance and machinability.
Silicomanganese FeMn68Si18
Silicomanganese alloying addition supplying manganese and silicon for steelmaking.
View technical dataR30605Haynes 25 (L-605)
Cobalt-nickel-chromium-tungsten alloy combining high-temperature strength with resistance to wear and galling.
Specialty Alloys & Welding Materials