ER80S-B2 (1.25Cr-0.5Mo) Wire
Chromium-molybdenum steel welding wire for compatible heat-resistant steel joints with controlled preheat and post-weld heat treatment.
Grade selection profile
Performance
Product forms
Processing & application routes
Industries
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Chromium-molybdenum steel welding wire for compatible heat-resistant steel joints with controlled preheat and post-weld heat treatment. Typical uses include steam piping, superheaters, refinery heater tubes, pressure vessels. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.
Key characteristics
- Creep and steam resistance
- matched Cr-Mo
- preheat and PWHT required
Typical applications
- Steam piping
- superheaters
- refinery heater tubes
- pressure vessels
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| C | 0.05-0.12 | wt% | Typical value |
| Cr | 1.0-1.5 | wt% | Typical value |
| Mo | 0.4-0.65 | wt% | Typical value |
| Mn | 0.4-1.3 | wt% | Typical value |
| Si | 0.3-0.7 | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 550 | MPa | After PWHT |
| Yield strength 0.2% | min 470 | MPa | After PWHT |
| Elongation | min 17 | % | After PWHT |
Specialty Alloys & Welding Materials