ndt

Nondestructive & Laboratory Testing

NDT and mechanical/chemical laboratory qualification.

We confirm the process route, performing site and inspection scope in the quotation, including which work is done in-house or arranged with a supplier.

Quality controls

  • Certified NDT Level II/III, calibrated equipment, MTC 3.1/3.2

Related grades

N06600

Alloy 600 (UNS N06600)

Compare Alloy 600 (Inconel 600) bar, plate and seamless tube requirements by specification, dimensions, delivery condition and mill documentation.

View details
S66286

A-286 (GH2132)

Iron-nickel-chromium precipitation-hardening alloy for high-strength fasteners and elevated-temperature components.

View details
R30188

Haynes 188

Cobalt-nickel-chromium-tungsten alloy for fabricated components exposed to high-temperature oxidation.

View details
S308L

ER308L Stainless Wire

Low-carbon austenitic stainless steel welding wire for joining compatible stainless grades.

View details
K11260

ER70S-6 Carbon Steel Wire

Carbon steel welding wire with manganese and silicon deoxidizers for general fabrication.

View details
W02510

D256 Austenitic Manganese Hardfacing

Austenitic manganese hardfacing consumable for impact-dominated wear where work hardening is part of the intended response.

View details
K20590

ER80S-B2 (1.25Cr-0.5Mo) Wire

Chromium-molybdenum steel welding wire for compatible heat-resistant steel joints with controlled preheat and post-weld heat treatment.

View details
K21015

ER80S-Ni1 Low-Temperature Wire

Nickel-bearing low-alloy steel welding wire for joints where low-temperature toughness is a specified requirement.

View details
N02061

ERNi-1 Pure Nickel Wire

Nickel welding wire for compatible nickel materials and specified dissimilar joints in corrosive service.

View details
od-hardband-100xt

Drill-Pipe Hardbanding Wire

Request hardbanding wire with the tool-joint material, deposition procedure, application requirements and inspection criteria.

View details
N06601

Inconel 601

Nickel-chromium-aluminium alloy for furnace and heat-treatment equipment exposed to oxidation and repeated heating.

View details
gh3128

GH3128

Nickel-base solid-solution alloy containing tungsten and molybdenum for elevated-temperature components.

View details
R30605

Haynes 25 (L-605)

Cobalt-nickel-chromium-tungsten alloy combining high-temperature strength with resistance to wear and galling.

View details
S309L

ER309L Stainless Wire

Austenitic stainless steel welding wire commonly considered for dissimilar stainless-to-steel joints and buffer layers.

View details
W07018

E7018 Low-Hydrogen Electrode

Low-hydrogen covered electrode for compatible carbon and low-alloy steel fabrication.

View details
hf-d642

D642 High-Chromium Hardfacing

Chromium-bearing iron-base hardfacing consumable for specified metal-to-metal wear and erosion conditions.

View details
K30960

ER62-B3 (2.25Cr-1Mo) Wire

Chromium-molybdenum steel welding wire for compatible pressure-equipment joints requiring a defined welding and heat-treatment procedure.

View details
K32515

ER80S-Ni3 (3.5Ni) Low-Temperature Wire

Nickel-bearing low-alloy steel welding wire for specified low-temperature steel joints; it remains iron-base despite its nickel addition.

View details
nw-ernicu7

ERNiCu-7 Nickel-Copper Welding Wire

Prepare an ERNiCu-7 solid-wire or bare-rod enquiry with the parent alloy, welding process, diameter and packaging requirements.

View details
od-hardband-300xt

Drill-Pipe Hardbanding Wire (300XT/WC type)

Carbide-reinforced hardbanding consumable for abrasive-wear protection, with casing-contact suitability confirmed for the specific product.

View details
N06625

Inconel 625

Nickel-chromium-molybdenum-niobium alloy for corrosion-resistant equipment and components requiring useful strength without precipitation hardening.

View details
N06002

Hastelloy X

Nickel-chromium-iron-molybdenum alloy for fabricated components requiring oxidation resistance and elevated-temperature strength.

View details
R30001

Stellite 1

High-carbon cobalt-chromium-tungsten hardfacing alloy for abrasion-dominated wear conditions with limited impact.

View details
N07718

Inconel 718 Powder

Nickel alloy 718 powder for powder-based components requiring a controlled precipitation-hardening response.

View details
w-er316l

ER316L Stainless Steel Welding Wire

Prepare an ER316L welding wire enquiry with the process, diameter or rod dimensions, packaging and lot certificate requirements.

View details
W07111

E71T-1 Flux-Cored Wire

Flux-cored welding wire for productive carbon-steel fabrication with the shielding and positional classification specified.

View details
hf-d667

D667 High-Chromium Cast-Iron Hardfacing

Chromium-carbide-bearing iron-base hardfacing consumable for abrasive wear with limited impact loading.

View details
K30945

ER90S-B9 (T91/P91) Wire

Modified chromium-molybdenum steel welding wire for compatible creep-resistant steel joints with controlled thermal processing.

View details
N06082

ERNiCr-3 Inconel Wire

Nickel-chromium welding wire for compatible nickel alloys and specified dissimilar-metal joints.

View details
od-tcc-rod

Cast Tungsten-Carbide Cored Rod (YZ series)

Cast tungsten-carbide-filled rod for abrasive-wear protection, with the tube material and deposition route specified at quotation.

View details
N06690

Inconel 690

High-chromium nickel alloy for corrosion-resistant tubing and chemical-processing equipment.

View details
gh3030

GH3030

Nickel-chromium solid-solution alloy for oxidation-resistant sheet and heat-processing components.

View details
R30006

Stellite 6

Cobalt-chromium-tungsten alloy for hardfacing and wear components requiring a balance of abrasion resistance and toughness.

View details
R31537

CoCrMo Alloy Powder

Cobalt-chromium-molybdenum powder for powder-based components requiring wear and corrosion resistance.

View details
S347

ER347 Stainless Wire

Niobium-stabilized stainless steel welding wire for compatible stabilized stainless joints and specified elevated-temperature service.

View details
K00808

EL8/H08A Submerged-Arc Wire + Flux

Submerged-arc welding wire supplied with a compatible flux selection for carbon-steel fabrication.

View details
hf-d688

D688 High-Chromium Hardfacing

Higher-hardness chromium-bearing iron-base hardfacing consumable for abrasion-dominated service.

View details
R30021

ECoCr-E Stellite 21 Electrode/Rod

Cobalt-chromium-molybdenum hardfacing consumable for specified wear, thermal-shock and corrosion conditions.

View details
N07718

Inconel 718

Precipitation-hardening nickel alloy for components requiring strength, fatigue resistance and controlled heat-treatment response.

View details
gh3044

GH3044

Nickel-chromium alloy strengthened with tungsten and molybdenum for fabricated high-temperature components.

View details
R30012

Stellite 12

Cobalt-chromium-tungsten alloy for wear conditions requiring more abrasion resistance than lower-carbon cobalt grades.

View details
R56400

Ti-6Al-4V (TC4) Powder

Titanium-aluminium-vanadium alloy powder for lightweight powder-based components requiring strength and corrosion resistance.

View details
S310

ER310 Stainless Wire

High-chromium, high-nickel stainless steel welding wire for compatible heat-resistant joints.

View details
hf-d707

D707 Tungsten-Carbide Hardfacing

Tungsten-carbide-bearing hardfacing consumable for severe abrasive wear, with the carbide and metallic matrix treated as one coating system.

View details
nw-ernicrmo3

ERNiCrMo-3 Nickel Alloy Welding Wire

Prepare an ERNiCrMo-3 filler-wire enquiry for compatible Alloy 625 joints, overlays or specified dissimilar joints.

View details
N07750

Inconel X-750

Precipitation-hardening nickel alloy for springs, fasteners and components where strength and relaxation resistance matter.

View details
N07001

Waspaloy (GH4738)

Precipitation-hardening nickel alloy for highly stressed components requiring controlled forging and heat treatment.

View details
R30021

Stellite 21

Lower-carbon cobalt-chromium-molybdenum alloy for components where ductility, thermal shock and corrosion influence wear-material selection.

View details
w-er2209

ER2209 Duplex Stainless Steel Welding Wire

Prepare an ER2209 solid-wire or bare-rod enquiry with the AWS classification, welding process, diameter and lot-document requirements.

View details
hf-d507

D507 Valve Seat Hardfacing

Iron-base hardfacing consumable for valve-seat and other metal-to-metal wear applications.

View details
N10276

ERNiCrMo-4 Hastelloy C-276 Wire

Nickel-chromium-molybdenum welding wire for compatible C-276-type corrosion-resistant joints and overlays.

View details
N08800

Incoloy 800

Iron-nickel-chromium alloy used in heat-processing equipment where oxidation and carburization must be considered.

View details
R30031

Stellite 31

Cobalt-base casting alloy for components exposed to combined elevated-temperature loading and wear.

View details
S32750

ER2594 Super-Duplex Wire

Super-duplex stainless steel welding wire for specified high-alloy duplex joints in chloride-bearing service.

View details
hf-d322

D322 Tool-Steel Hardfacing

Tool-steel-type iron-base hardfacing consumable for wear surfaces requiring a balance of hot hardness and toughness.

View details
N06022

ERNiCrMo-10 Hastelloy C-22 Wire

Nickel-chromium-molybdenum welding wire for compatible C-22-type corrosion-resistant joints and overlays.

View details
N08810

Incoloy 800H

Iron-nickel-chromium alloy with controlled carbon and grain requirements for elevated-temperature creep service.

View details
R30016

Tribaloy T-400

Cobalt-molybdenum-silicon alloy for wear components exposed to sliding contact and galling.

View details
S410

ER410 Stainless Wire

Martensitic stainless steel welding wire for compatible joints and overlays requiring controlled heat treatment.

View details
N08811

Incoloy 800HT

Iron-nickel-chromium alloy with controlled aluminium and titanium requirements for elevated-temperature creep service.

View details
R30035

MP35N

Cobalt-nickel-chromium-molybdenum alloy for corrosion-resistant components requiring a combination of strength and toughness.

View details
pow-nicraly

NiCrAlY Bond Coat Powder

Nickel-chromium-aluminium-yttrium powder for oxidation-resistant thermal-spray bond coats.

View details
N08825

Incoloy 825

Nickel-iron-chromium alloy with molybdenum and copper for chemical-processing equipment exposed to corrosive media.

View details
N07718

ERNiFeCr-2 Inconel 718 Wire

Age-hardenable nickel alloy 718 welding wire for compatible high-strength nickel-alloy joints.

View details
N09925

Incoloy 925

Age-hardenable nickel-iron-chromium alloy combining corrosion resistance with a strengthening heat-treatment response.

View details
N04400

Monel 400

Nickel-copper alloy for components exposed to seawater, alkalis and other specified corrosive environments.

View details
N05500

Monel K-500

Age-hardenable nickel-copper alloy for shafts, fasteners and other corrosion-resistant components requiring increased strength.

View details
N10276

Hastelloy C-276

Nickel-molybdenum-chromium alloy for demanding chemical-processing and pollution-control equipment.

View details
N06022

Hastelloy C-22

Nickel-chromium-molybdenum alloy for equipment exposed to oxidizing chemicals and chloride-bearing environments.

View details
N06200

Hastelloy C-2000

Nickel-chromium-molybdenum alloy with copper for chemical-processing equipment exposed to specified acid environments.

View details
N10665

Hastelloy B-2

Nickel-molybdenum alloy for reducing-acid environments where the presence of oxidizing contaminants must be evaluated.

View details
N08020

Alloy 20 (Carpenter 20)

High-nickel austenitic stainless steel for chemical equipment, particularly where sulfuric-acid exposure influences selection.

View details
N08904

904L

High-alloy austenitic stainless steel for process equipment requiring corrosion resistance beyond standard stainless grades.

View details
Discuss this capability