Drill-Pipe Hardbanding Wire (300XT/WC type)
Carbide-reinforced hardbanding consumable for abrasive-wear protection, with casing-contact suitability confirmed for the specific product.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Carbide-reinforced hardbanding consumable for abrasive-wear protection, with casing-contact suitability confirmed for the specific product. Typical uses include open-hole / non-casing-contact hardbanding, severe abrasive drilling. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.
Key characteristics
- HRC 60+ with WC particles
- extreme abrasion
- for non-casing-contact zones
Typical applications
- Open-hole / non-casing-contact hardbanding
- severe abrasive drilling
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Fe | balance | wt% | Typical value |
| WC | 20-40 | wt% | Typical value |
| C | 1-3 | wt% | Typical value |
| Cr | 2-5 | wt% | Typical value |
| Mn | 1-2 | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Hardness | 60+ HRC matrix | HRC | As deposited |
| WC hardness | 2000-2500 | HV | Particles |
Specialty Alloys & Welding Materials