UNS W02510

D256 Austenitic Manganese Hardfacing

Austenitic manganese hardfacing consumable for impact-dominated wear where work hardening is part of the intended response.

Grade selection profile

Performance

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Austenitic manganese hardfacing consumable for impact-dominated wear where work hardening is part of the intended response. Typical uses include crusher hammers and jaws, excavator bucket teeth, railway crossings, mill liners. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.

Key characteristics

  • Tough and initially soft
  • surface work-hardens to HRC 50+ under impact
  • resists cracking

Typical applications

  • Crusher hammers and jaws
  • excavator bucket teeth
  • railway crossings
  • mill liners

Grade names and equivalents

EFeMn-AEquivalentHadfield hardfacingCommon name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
C0.7-1.1wt%Typical value
Mn11.0-14.0wt%Typical value
Si0.4-1.0wt%Typical value
Cr2.5-3.5wt%Typical value
Febalancewt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness as deposited170-230HBAs welded
Hardness work-hardened50+HRCAfter impact

Standards and specifications

AWS A5.13 (2020)Specification for Solid Surfacing Electrodes and Rods / Surfacing ElectrodesAWS A5.21 (2020)Specification for Bare Electrodes and Rods for Surfacing

Capabilities