D322 Tool-Steel Hardfacing
Tool-steel-type iron-base hardfacing consumable for wear surfaces requiring a balance of hot hardness and toughness.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Tool-steel-type iron-base hardfacing consumable for wear surfaces requiring a balance of hot hardness and toughness. Typical uses include hot-forging and casting dies, gear and shaft build-up, tool repair. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.
Key characteristics
- HRC 40-50
- good hot hardness and toughness
- machinable after anneal
Typical applications
- Hot-forging and casting dies
- gear and shaft build-up
- tool repair
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| C | 0.25-0.4 | wt% | Typical value |
| Cr | 4.5-5.5 | wt% | Typical value |
| Mo | 0.8-1.2 | wt% | Typical value |
| Mn | 0.5-1.0 | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Hardness | 40-50 | HRC | As welded |
Specialty Alloys & Welding Materials