UNS R30001

Stellite 1

High-carbon cobalt-chromium-tungsten hardfacing alloy for abrasion-dominated wear conditions with limited impact.

Grade selection profile

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

High-carbon cobalt-chromium-tungsten hardfacing alloy for abrasion-dominated wear conditions with limited impact. Typical uses include cutting tools, bearings and sleeves, pump components, grain-crushing and hard-wear parts. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • Very hard deposit with excellent abrasion and corrosion resistance
  • limited impact resistance

Typical applications

  • Cutting tools
  • bearings and sleeves
  • pump components
  • grain-crushing and hard-wear parts

Grade names and equivalents

ECoCr-ATrade nameStellite No.1Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Cobalancewt%Typical value
Cr28.0-32.0wt%Typical value
W11.0-13.0wt%Typical value
C2.0-2.5wt%Typical value
Fe3.0 maxwt%Typical value
Mn1.0 maxwt%Typical value
Si1.0 maxwt%Typical value
Ni3.0 maxwt%Typical value
Mo1.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness54-58HRCAs cast / as deposited

Physical properties

PropertyValueUnitCondition / standard
Density8.6g/cm3Typical
Melting range1250-1295CTypical

Standards and specifications

AWS A5.21 (2020)Specification for Bare Electrodes and Rods for SurfacingAWS A5.13 (2020)Specification for Solid Surfacing Electrodes and Rods / Surfacing Electrodes

Capabilities