ER309L Stainless Wire
Austenitic stainless steel welding wire commonly considered for dissimilar stainless-to-steel joints and buffer layers.
Grade selection profile
Performance
Product forms
Processing & application routes
Industries
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Austenitic stainless steel welding wire commonly considered for dissimilar stainless-to-steel joints and buffer layers. Typical uses include dissimilar and clad steel, buffer layers, 309 fabrication, high-temperature joints. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.
Key characteristics
- Joins stainless to carbon/low-alloy steel
- good buffer/cladding layer
- high-temperature scaling resistance
Typical applications
- Dissimilar and clad steel
- buffer layers
- 309 fabrication
- high-temperature joints
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| C | 0.03 max | wt% | Typical value |
| Cr | 23.0-25.0 | wt% | Typical value |
| Ni | 12.0-14.0 | wt% | Typical value |
| Mn | 1.0-2.5 | wt% | Typical value |
| Si | 0.3-0.65 | wt% | Typical value |
| Mo | 0.75 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 550 | MPa | As welded |
| Yield strength 0.2% | min 380 | MPa | As welded |
| Elongation | min 30 | % | As welded |
Specialty Alloys & Welding Materials