Haynes 25 (L-605)
Cobalt-nickel-chromium-tungsten alloy combining high-temperature strength with resistance to wear and galling.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Cobalt-nickel-chromium-tungsten alloy combining high-temperature strength with resistance to wear and galling. Typical uses include gas-turbine parts, high-temperature bearings and springs, furnace components, surgical and wear applications. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.
Key characteristics
- Excellent high-temperature strength and oxidation
- good resistance to wear and galling
- work hardens
Typical applications
- Gas-turbine parts
- high-temperature bearings and springs
- furnace components
- surgical and wear applications
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Co | balance | wt% | Typical value |
| Cr | 19.0-21.0 | wt% | Typical value |
| W | 14.0-16.0 | wt% | Typical value |
| Ni | 9.0-11.0 | wt% | Typical value |
| Fe | 3.0 max | wt% | Typical value |
| C | 0.05-0.15 | wt% | Typical value |
| Mn | 1.0-2.0 | wt% | Typical value |
| Si | 1.0 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 970 | MPa | Solution annealed |
| Yield strength 0.2% | min 460 | MPa | Solution annealed |
| Elongation | min 25 | % | Solution annealed |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 9.13 | g/cm3 | Typical |
| Melting range | 1330-1410 | C | Typical |
Specialty Alloys & Welding Materials