UNS N08811

Incoloy 800HT

Iron-nickel-chromium alloy with controlled aluminium and titanium requirements for elevated-temperature creep service.

Grade selection profile

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Iron-nickel-chromium alloy with controlled aluminium and titanium requirements for elevated-temperature creep service. Typical uses include reformer and ethylene furnace components, high-temperature headers, industrial furnace parts. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • Al + Ti controlled to 0.85-1.2%
  • highest creep-rupture strength in the 800 family

Typical applications

  • Reformer and ethylene furnace components
  • high-temperature headers
  • industrial furnace parts

Grade names and equivalents

Alloy 800HTCommon nameNS1104Equivalent

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Ni30.0-35.0wt%Typical value
Cr19.0-23.0wt%Typical value
Fe39.5 minwt%Typical value
C0.06-0.10wt%Typical value
Al+Ti0.85-1.20wt%Typical value
Mn1.5 maxwt%Typical value
Si1.0 maxwt%Typical value
Cu0.75 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Tensile strengthmin 450MPaAnnealed
Yield strength 0.2%min 170MPaAnnealed
Elongationmin 30%Annealed

Physical properties

PropertyValueUnitCondition / standard
Density7.94g/cm3Typical

Standards and specifications

ASTM B409 (2024)Standard Specification for Nickel-Iron-Chromium Alloy (UNS N08800/N08810/N08811) Plate, Sheet, and StripGB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products

Capabilities