Incoloy 800H
Iron-nickel-chromium alloy with controlled carbon and grain requirements for elevated-temperature creep service.
Grade selection profile
Performance
Product forms
Processing & application routes
Industries
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Iron-nickel-chromium alloy with controlled carbon and grain requirements for elevated-temperature creep service. Typical uses include ethylene furnace tubes, manifolds, reformer pigtails, industrial furnaces. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.
Key characteristics
- Controlled carbon (0.05-0.10%) and grain size for creep strength
- oxidation and carburization resistance
Typical applications
- Ethylene furnace tubes
- manifolds
- reformer pigtails
- industrial furnaces
- high-temperature pressure equipment
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ni | 30.0-35.0 | wt% | Typical value |
| Cr | 19.0-23.0 | wt% | Typical value |
| Fe | 39.5 min | wt% | Typical value |
| C | 0.05-0.10 | wt% | Typical value |
| Mn | 1.5 max | wt% | Typical value |
| Si | 1.0 max | wt% | Typical value |
| Al | 0.15-0.6 | wt% | Typical value |
| Ti | 0.15-0.6 | wt% | Typical value |
| Cu | 0.75 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 450 | MPa | Annealed |
| Yield strength 0.2% | min 170 | MPa | Annealed |
| Elongation | min 30 | % | Annealed |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 7.94 | g/cm3 | Typical |
Specialty Alloys & Welding Materials