Inconel X-750
Precipitation-hardening nickel alloy for springs, fasteners and components where strength and relaxation resistance matter.
Grade selection profile
Performance
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Precipitation-hardening nickel alloy for springs, fasteners and components where strength and relaxation resistance matter. Typical uses include springs, fasteners, gas-turbine parts, heat-treating fixtures. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.
Key characteristics
- High tensile and creep-rupture strength
- good relaxation resistance
- corrosion resistance similar to Alloy 600
Typical applications
- Springs
- fasteners
- gas-turbine parts
- reactor components
- heat-treating fixtures
- forming tools
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ni | 70.0 min | wt% | Typical value |
| Cr | 14.0-17.0 | wt% | Typical value |
| Fe | 5.0-9.0 | wt% | Typical value |
| Nb | 0.70-1.20 | wt% | Typical value |
| Ti | 2.25-2.75 | wt% | Typical value |
| Al | 0.40-1.00 | wt% | Typical value |
| C | 0.08 max | wt% | Typical value |
| Mn | 1.0 max | wt% | Typical value |
| Si | 0.5 max | wt% | Typical value |
| Cu | 0.5 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 1172 | MPa | Solution + aged |
| Yield strength 0.2% | min 758 | MPa | Solution + aged |
| Elongation | min 20 | % | Solution + aged |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 8.28 | g/cm3 | Typical |
| Melting range | 1393-1427 | C | Typical |
Specialty Alloys & Welding Materials