ER410 Stainless Wire
Martensitic stainless steel welding wire for compatible joints and overlays requiring controlled heat treatment.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Martensitic stainless steel welding wire for compatible joints and overlays requiring controlled heat treatment. Typical uses include valves and pumps, turbine blades, 410 fabrication, wear-resistant build-up. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.
Key characteristics
- Air-hardening martensitic
- moderate corrosion
- high hardness after tempering
Typical applications
- Valves and pumps
- turbine blades
- 410 fabrication
- wear-resistant build-up
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| C | 0.12 max | wt% | Typical value |
| Cr | 11.5-13.5 | wt% | Typical value |
| Mn | 0.6 max | wt% | Typical value |
| Si | 0.5 max | wt% | Typical value |
| Ni | 0.7 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 520 | MPa | After PWHT |
| Elongation | min 20 | % | After PWHT |
| Hardness | 35-45 | HRC | After temper |
Specialty Alloys & Welding Materials