Inconel 601
Nickel-chromium-aluminium alloy for furnace and heat-treatment equipment exposed to oxidation and repeated heating.
Grade selection profile
Performance
Product forms
Industries
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Nickel-chromium-aluminium alloy for furnace and heat-treatment equipment exposed to oxidation and repeated heating. Typical uses include heat-treatment baskets and fixtures, radiant tubes, gas-turbine components, waste incinerators. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.
Key characteristics
- Superior oxidation and carburization resistance
- good high-temperature strength
- resists cyclic heating
Typical applications
- Heat-treatment baskets and fixtures
- radiant tubes
- gas-turbine components
- waste incinerators
- catalyst supports
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ni | 58.0-63.0 | wt% | Typical value |
| Cr | 21.0-25.0 | wt% | Typical value |
| Fe | balance | wt% | Typical value |
| Al | 1.0-1.7 | wt% | Typical value |
| C | 0.10 max | wt% | Typical value |
| Mn | 1.0 max | wt% | Typical value |
| Cu | 1.0 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 550 | MPa | Annealed |
| Yield strength 0.2% | min 205 | MPa | Annealed |
| Elongation | min 30 | % | Annealed |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 8.11 | g/cm3 | Typical |
| Melting range | 1300-1370 | C | Typical |
Specialty Alloys & Welding Materials