UNS K30960

ER62-B3 (2.25Cr-1Mo) Wire

Chromium-molybdenum steel welding wire for compatible pressure-equipment joints requiring a defined welding and heat-treatment procedure.

Grade selection profile

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Chromium-molybdenum steel welding wire for compatible pressure-equipment joints requiring a defined welding and heat-treatment procedure. Typical uses include boiler and refinery components, high-temp piping. For a quotation, identify the parent materials, welding or surfacing process, consumable form, diameter and applicable classification. Agree the welding procedure, heat treatment and inspection requirements for the actual joint or overlay.

Key characteristics

  • Higher Cr-Mo for creep and hydrogen resistance
  • preheat and controlled PWHT

Typical applications

  • Hydroprocessing reactors
  • boiler and refinery components
  • high-temp piping

Grade names and equivalents

E8018-B3EquivalentR40Equivalent

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
C0.05-0.12wt%Typical value
Cr2.0-2.5wt%Typical value
Mo0.9-1.2wt%Typical value
Mn0.4-1.3wt%Typical value
Si0.3-0.7wt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Tensile strengthmin 620MPaAfter PWHT
Yield strength 0.2%min 500MPaAfter PWHT
Elongationmin 17%After PWHT

Standards and specifications

AWS A5.28 (2021)Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc WeldingAWS A5.5 (2021)Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc WeldingGB/T 17854 (2018)Stainless Steel Welding Electrodes and Rods

Capabilities