UNS N06200

Hastelloy C-2000

Nickel-chromium-molybdenum alloy with copper for chemical-processing equipment exposed to specified acid environments.

Grade selection profile

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Nickel-chromium-molybdenum alloy with copper for chemical-processing equipment exposed to specified acid environments. Typical uses include sulfuric acid plants, pharmaceutical, fine chemical, pickling. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • Resists both oxidizing and reducing acids including sulfuric
  • copper addition expands versatility
  • good weldability

Typical applications

  • Sulfuric acid plants
  • pharmaceutical
  • fine chemical
  • pickling
  • heat exchangers

Grade names and equivalents

Alloy C-2000Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Nibalancewt%Typical value
Cr22.0-24.0wt%Typical value
Mo15.0-17.0wt%Typical value
Cu1.3-1.9wt%Typical value
Fe3.0 maxwt%Typical value
C0.01 maxwt%Typical value
Mn0.5 maxwt%Typical value
Si0.08 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Tensile strengthmin 690MPaSolution annealed
Yield strength 0.2%min 310MPaSolution annealed
Elongationmin 45%Solution annealed

Physical properties

PropertyValueUnitCondition / standard
Density8.5g/cm3Typical

Standards and specifications

ASTM B574 (2023)Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium Alloy (UNS N10276) RodASTM B575 (2023)Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium-Tungsten Alloy (UNS N10276) Plate, Sheet, and StripGB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products

Capabilities