UNS R30006

Stellite 6

Cobalt-chromium-tungsten alloy for hardfacing and wear components requiring a balance of abrasion resistance and toughness.

Grade selection profile

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Cobalt-chromium-tungsten alloy for hardfacing and wear components requiring a balance of abrasion resistance and toughness. Typical uses include valve seats and gates, pump shafts and sleeves, screw conveyors, hot-working dies. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • All-purpose hardfacing alloy
  • good abrasion, corrosion and heat resistance
  • tolerates moderate impact

Typical applications

  • Valve seats and gates
  • pump shafts and sleeves
  • screw conveyors
  • hot-working dies
  • engine valves

Grade names and equivalents

ECoCr-BTrade nameStellite No.6Common nameD802Equivalent

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Cobalancewt%Typical value
Cr27.0-31.0wt%Typical value
W3.5-5.5wt%Typical value
C0.9-1.4wt%Typical value
Ni3.0 maxwt%Typical value
Fe3.0 maxwt%Typical value
Mo1.0 maxwt%Typical value
Mn1.0 maxwt%Typical value
Si1.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness39-45HRCAs cast / as deposited

Physical properties

PropertyValueUnitCondition / standard
Density8.44g/cm3Typical
Melting range1285-1410CTypical

Standards and specifications

AWS A5.21 (2020)Specification for Bare Electrodes and Rods for SurfacingAWS A5.13 (2020)Specification for Solid Surfacing Electrodes and Rods / Surfacing Electrodes

Capabilities