Waspaloy (GH4738)
Precipitation-hardening nickel alloy for highly stressed components requiring controlled forging and heat treatment.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Precipitation-hardening nickel alloy for highly stressed components requiring controlled forging and heat treatment. Typical uses include gas-turbine discs, blades and shafts, high-temperature fasteners. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.
Key characteristics
- High tensile and creep strength
- good oxidation and hot-corrosion resistance
- titanium and aluminium age hardening
Typical applications
- Gas-turbine discs, blades and shafts
- high-temperature fasteners
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ni | balance | wt% | Typical value |
| Cr | 18.0-21.0 | wt% | Typical value |
| Co | 12.0-15.0 | wt% | Typical value |
| Mo | 3.5-5.0 | wt% | Typical value |
| Ti | 2.75-3.25 | wt% | Typical value |
| Al | 1.2-1.6 | wt% | Typical value |
| Fe | 2.0 max | wt% | Typical value |
| C | 0.03-0.1 | wt% | Typical value |
| Mn | 0.1 max | wt% | Typical value |
| Si | 0.15 max | wt% | Typical value |
| B | 0.006 max | wt% | Typical value |
| Zr | 0.08 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Tensile strength | min 1240 | MPa | Solution + aged |
| Yield strength 0.2% | min 793 | MPa | Solution + aged |
| Elongation | min 12 | % | Solution + aged |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 8.19 | g/cm3 | Typical |
Specialty Alloys & Welding Materials