UNS R30012

Stellite 12

Cobalt-chromium-tungsten alloy for wear conditions requiring more abrasion resistance than lower-carbon cobalt grades.

Grade selection profile

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Cobalt-chromium-tungsten alloy for wear conditions requiring more abrasion resistance than lower-carbon cobalt grades. Typical uses include severe-wear valve and pump parts, saw tips, bearings, agricultural and industrial knives. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • Harder than Stellite 6 with better abrasion resistance
  • somewhat lower impact tolerance

Typical applications

  • Severe-wear valve and pump parts
  • saw tips
  • bearings
  • agricultural and industrial knives

Grade names and equivalents

ECoCr-CTrade nameStellite No.12Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Cobalancewt%Typical value
Cr28.0-32.0wt%Typical value
W7.0-9.0wt%Typical value
C1.2-1.7wt%Typical value
Ni3.0 maxwt%Typical value
Fe3.0 maxwt%Typical value
Mo1.0 maxwt%Typical value
Mn1.0 maxwt%Typical value
Si1.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness45-50HRCAs cast / as deposited

Physical properties

PropertyValueUnitCondition / standard
Density8.46g/cm3Typical
Melting range1265-1290CTypical

Standards and specifications

AWS A5.21 (2020)Specification for Bare Electrodes and Rods for SurfacingAWS A5.13 (2020)Specification for Solid Surfacing Electrodes and Rods / Surfacing Electrodes

Capabilities