UNS R30016

Tribaloy T-400

Cobalt-molybdenum-silicon alloy for wear components exposed to sliding contact and galling.

Grade selection profile

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Cobalt-molybdenum-silicon alloy for wear components exposed to sliding contact and galling. Typical uses include pump and valve components, seals and bearings, chemical and petrochemical, extrusion and food equipment. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • Outstanding wear and corrosion at low and high temperature
  • galling resistant
  • minimal iron dilution sensitivity

Typical applications

  • Pump and valve components
  • seals and bearings
  • chemical and petrochemical
  • extrusion and food equipment

Grade names and equivalents

T-400Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Cobalancewt%Typical value
Mo28.0-30.0wt%Typical value
Cr8.0-9.0wt%Typical value
Si2.4-2.8wt%Typical value
C0.08 maxwt%Typical value
Fe1.5 maxwt%Typical value
Ni1.5 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness48-54HRCAs cast

Physical properties

PropertyValueUnitCondition / standard
Density8.9g/cm3Typical

Standards and specifications

AWS A5.21 (2020)Specification for Bare Electrodes and Rods for Surfacing

Capabilities