UNS N05500

Monel K-500

Age-hardenable nickel-copper alloy for shafts, fasteners and other corrosion-resistant components requiring increased strength.

Grade selection profile

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Age-hardenable nickel-copper alloy for shafts, fasteners and other corrosion-resistant components requiring increased strength. Typical uses include pump shafts, impellers, marine fasteners, valve trim. For a quotation, identify the required product form, dimensions, delivery condition and applicable material specification. Compare the service medium, temperature and loading with the required manufacturing and heat-treatment route before final grade selection.

Key characteristics

  • About twice the tensile strength of Monel 400 after aging
  • good fatigue and corrosion-fatigue resistance

Typical applications

  • Pump shafts
  • impellers
  • marine fasteners
  • valve trim
  • oilwell drill collars and instruments
  • springs

Grade names and equivalents

Alloy K-500Common nameNCu30AlEquivalent2.4375Equivalent

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Ni63.0 minwt%Typical value
Cu27.0-33.0wt%Typical value
Al2.30-3.15wt%Typical value
Ti0.35-0.85wt%Typical value
Fe2.0 maxwt%Typical value
C0.25 maxwt%Typical value
Mn1.5 maxwt%Typical value
Si0.5 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Tensile strengthmin 965MPaSolution + aged
Yield strength 0.2%min 690MPaSolution + aged
Elongationmin 20%Solution + aged

Physical properties

PropertyValueUnitCondition / standard
Density8.44g/cm3Typical
Melting range1315-1350CTypical

Standards and specifications

ASTM B164 (2024)Standard Specification for Nickel-Copper Alloy Rod, Bar, and WireGB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products

Capabilities