Ferrosilicon 75
Ferrosilicon alloying addition and deoxidizer for steelmaking and foundry operations.
Grade selection profile
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Ferrosilicon alloying addition and deoxidizer for steelmaking and foundry operations. Typical uses include steelmaking deoxidation and alloying, cast-iron inoculation, magnesium production, dense media. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.
Key characteristics
- Strong deoxidizer
- raises silicon content
- inoculates cast iron
- controlled aluminum and phosphorus
Typical applications
- Steelmaking deoxidation and alloying
- cast-iron inoculation
- magnesium production
- dense media
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Si | 72.0-80.0 | wt% | Typical value |
| C | 0.2 max | wt% | Typical value |
| Al | 1.5 max | wt% | Typical value |
| P | 0.04 max | wt% | Typical value |
| S | 0.02 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Bulk density | 0.9 | t/m3 | Lumps |
| Melting point | about 1300 | C | Typical |
Specialty Alloys & Welding Materials