Silicomanganese FeMn68Si18

Silicomanganese alloying addition supplying manganese and silicon for steelmaking.

Grade selection profile

Product forms

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Silicomanganese alloying addition supplying manganese and silicon for steelmaking. Typical uses include steelmaking deoxidation and alloying, production of low-carbon manganese products. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.

Key characteristics

  • Provides both Si and Mn
  • cleaner steel with lower inclusions
  • high/low carbon grades available

Typical applications

  • Steelmaking deoxidation and alloying
  • production of low-carbon manganese products

Grade names and equivalents

SiMn 68/18Common nameSilicomanganeseCommon name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Mn65.0-70.0wt%Typical value
Si17.0-20.0wt%Typical value
C2.0-2.5wt%Typical value
P0.2 maxwt%Typical value
S0.04 maxwt%Typical value
Febalancewt%Typical value

Physical properties

PropertyValueUnitCondition / standard
Bulk density1.1t/m3Lumps

Standards and specifications

GB/T 4008 (2008)Silicomanganese

Capabilities