Ni35 Self-Fluxing Powder

Nickel-base self-fluxing powder balancing coating wear resistance, corrosion resistance and machinability.

Grade selection profile

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Nickel-base self-fluxing powder balancing coating wear resistance, corrosion resistance and machinability. Typical uses include pump and valve parts, chemical equipment, shafts and sleeves, general repair. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 30-40
  • balanced corrosion and wear
  • machinable

Typical applications

  • Pump and valve parts
  • chemical equipment
  • shafts and sleeves
  • general repair

Grade names and equivalents

Ni-35Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Nibalancewt%Typical value
Cr7.0-9.0wt%Typical value
B1.5-2.5wt%Typical value
Si2.5-3.5wt%Typical value
C0.3 maxwt%Typical value
Fe6.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness30-40HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density8.1g/cm3Typical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products