Ni25 Self-Fluxing Powder

Lower-hardness nickel-base self-fluxing powder for fused coatings where machinability and corrosion resistance are important.

Grade selection profile

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Lower-hardness nickel-base self-fluxing powder for fused coatings where machinability and corrosion resistance are important. Typical uses include glass molds, glass-bottle plungers, corrosion-resistant build-up, parts requiring post-machining. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 20-30
  • good corrosion and thermal-shock resistance
  • readily machined after fusing

Typical applications

  • Glass molds
  • glass-bottle plungers
  • corrosion-resistant build-up
  • parts requiring post-machining

Grade names and equivalents

Ni-25Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Nibalancewt%Typical value
Cr4.0-6.0wt%Typical value
B1.0-2.0wt%Typical value
Si2.0-3.0wt%Typical value
C0.2 maxwt%Typical value
Fe5.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness20-30HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density8g/cm3Typical
Melting rangeabout 1050CTypical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products