Ferromolybdenum FeMo60
Ferromolybdenum alloying addition used to introduce molybdenum into steel and cast alloys.
Grade selection profile
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Ferromolybdenum alloying addition used to introduce molybdenum into steel and cast alloys. Typical uses include alloy, stainless and tool steel, cast iron, weld hardfacing, high-speed steel. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.
Key characteristics
- Introduces molybdenum
- boosts high-temperature strength and pitting resistance
- controlled Cu and S
Typical applications
- Alloy, stainless and tool steel
- cast iron
- weld hardfacing
- high-speed steel
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Mo | 55.0-65.0 | wt% | Typical value |
| Si | 1.0 max | wt% | Typical value |
| C | 0.5 max | wt% | Typical value |
| Cu | 0.5 max | wt% | Typical value |
| S | 0.1 max | wt% | Typical value |
| P | 0.05 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Bulk density | 1.5 | t/m3 | Lumps |
Specialty Alloys & Welding Materials