Ferrotitanium FeTi40
Ferrotitanium alloying addition used for deoxidation, stabilization and titanium adjustment in steelmaking.
Grade selection profile
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Ferrotitanium alloying addition used for deoxidation, stabilization and titanium adjustment in steelmaking. Typical uses include stainless and tool steel, welding rod coatings, cast iron. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.
Key characteristics
- Strong deoxidizer and nitrogen scavenger
- controls grain size
- stabilizes carbon
Typical applications
- Stainless and tool steel
- welding rod coatings
- cast iron
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ti | 35.0-45.0 | wt% | Typical value |
| Al | 6.0 max | wt% | Typical value |
| Si | 3.0 max | wt% | Typical value |
| C | 0.1 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
| S | 0.03 max | wt% | Typical value |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Bulk density | 1.4 | t/m3 | Lumps |
Specialty Alloys & Welding Materials