Ferrotungsten FeW70
Ferrotungsten alloying addition used to introduce tungsten into tool steels and other specified alloy systems.
Grade selection profile
Product forms
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Ferrotungsten alloying addition used to introduce tungsten into tool steels and other specified alloy systems. Typical uses include high-speed steel, hot/cold work tool steel, wear parts, heavy alloys. For a quotation, identify the melt practice, target element addition, permitted impurities, particle or lump size and required lot documentation. This is a metallurgical addition, not a finished component-grade steel; its effect depends on the receiving melt and process.
Key characteristics
- Introduces tungsten for red hardness and wear
- high melting point
- controlled Mn and S
Typical applications
- High-speed steel
- hot/cold work tool steel
- wear parts
- heavy alloys
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| W | 65.0-75.0 | wt% | Typical value |
| C | 0.2 max | wt% | Typical value |
| Mn | 0.25 max | wt% | Typical value |
| S | 0.05 max | wt% | Typical value |
| P | 0.03 max | wt% | Typical value |
| Fe | balance | wt% | Typical value |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Bulk density | 2.5 | t/m3 | Lumps |
| Melting point | over 2000 | C | Typical |
Specialty Alloys & Welding Materials