Cu15 Self-Fluxing Powder

Copper-base self-fluxing powder for coating applications where friction, conductivity and corrosion behavior influence selection.

Grade selection profile

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Copper-base self-fluxing powder for coating applications where friction, conductivity and corrosion behavior influence selection. Typical uses include bearings and bushes, sealing surfaces, conductive and anti-fretting deposits. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 10-20
  • low friction and good conductivity
  • corrosion resistant

Typical applications

  • Bearings and bushes
  • sealing surfaces
  • conductive and anti-fretting deposits

Grade names and equivalents

Cu-15Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Cubalancewt%Typical value
Sn7.0-9.0wt%Typical value
P0.3-0.7wt%Typical value
B0.1 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness10-20HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density8.8g/cm3Typical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products