Fe45 Self-Fluxing Powder

Iron-base self-fluxing powder for economical build-up and wear-resistant fused coatings.

Grade selection profile

Performance

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Iron-base self-fluxing powder for economical build-up and wear-resistant fused coatings. Typical uses include shafts and gears, agricultural and mining parts, general build-up and repair. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 45-55
  • economical
  • moderate corrosion
  • good for build-up and wear

Typical applications

  • Shafts and gears
  • agricultural and mining parts
  • general build-up and repair

Grade names and equivalents

Fe-45Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Febalancewt%Typical value
Cr13.0-15.0wt%Typical value
Ni7.0-9.0wt%Typical value
B1.5-2.5wt%Typical value
Si2.5-3.5wt%Typical value
C0.5 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness45-55HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density7.6g/cm3Typical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products