Fe60 Self-Fluxing Powder
Higher-hardness iron-base self-fluxing powder for abrasion-resistant fused coatings where corrosion is not the primary design requirement.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Higher-hardness iron-base self-fluxing powder for abrasion-resistant fused coatings where corrosion is not the primary design requirement. Typical uses include crushers and mills, coal and mining equipment, wear build-up. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.
Key characteristics
- HRC 58-64
- high abrasion at low cost
- limited corrosion
Typical applications
- Crushers and mills
- coal and mining equipment
- wear build-up
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Fe | balance | wt% | Typical value |
| Cr | 20.0-24.0 | wt% | Typical value |
| Ni | 3.0 max | wt% | Typical value |
| B | 2.5-3.5 | wt% | Typical value |
| Si | 3.0-4.0 | wt% | Typical value |
| C | 1.0 max | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Hardness | 58-64 | HRC | As fused |
Physical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Density | 7.7 | g/cm3 | Typical |
Specialty Alloys & Welding Materials