Ni45 Self-Fluxing Powder

Nickel-base self-fluxing powder for fused coatings exposed to sliding or abrasive wear and specified corrosive media.

Grade selection profile

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Nickel-base self-fluxing powder for fused coatings exposed to sliding or abrasive wear and specified corrosive media. Typical uses include plungers and shafts, valve seats, oil pump parts, mechanical seals. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 40-50
  • good wear and corrosion
  • one of the most widely used spray-fuse powders

Typical applications

  • Plungers and shafts
  • valve seats
  • oil pump parts
  • mechanical seals
  • mold components

Grade names and equivalents

Ni-45Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Nibalancewt%Typical value
Cr11.0-13.0wt%Typical value
B2.0-3.0wt%Typical value
Si3.0-4.0wt%Typical value
C0.4 maxwt%Typical value
Fe8.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness40-50HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density8.2g/cm3Typical
Melting rangeabout 1020CTypical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products