Ni55 Self-Fluxing Powder

Nickel-base self-fluxing powder for fused wear-resistant coatings where increased abrasion resistance is required.

Grade selection profile

Product forms

Processing & application routes

Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.

Material overview

Nickel-base self-fluxing powder for fused wear-resistant coatings where increased abrasion resistance is required. Typical uses include conveyor screws, fan blades, pump impellers, mining and steel equipment. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.

Key characteristics

  • HRC 50-58
  • high abrasion resistance
  • retains corrosion resistance

Typical applications

  • Conveyor screws
  • fan blades
  • pump impellers
  • mining and steel equipment

Grade names and equivalents

Ni-55Common name

Technical properties

Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.

Chemical composition

PropertyValueUnitCondition / standard
Nibalancewt%Typical value
Cr13.0-15.0wt%Typical value
B2.5-3.5wt%Typical value
Si3.5-4.5wt%Typical value
C0.6 maxwt%Typical value
Fe8.0 maxwt%Typical value

Mechanical properties

PropertyValueUnitCondition / standard
Hardness50-58HRCAs fused

Physical properties

PropertyValueUnitCondition / standard
Density8.2g/cm3Typical

Standards and specifications

GB/T 15007 (2017)Specification for Nickel and Nickel Alloy Wrought Products