NiWC35 Tungsten-Carbide Reinforced Powder
Tungsten-carbide-reinforced nickel-matrix powder for abrasive-wear coatings; the carbide and binder must be specified together.
Grade selection profile
Performance
Product forms
Processing & application routes
Select against the service temperature, medium, loading and applicable specification. A shared material system does not make grades or process routes interchangeable.
Material overview
Tungsten-carbide-reinforced nickel-matrix powder for abrasive-wear coatings; the carbide and binder must be specified together. Typical uses include fan blades, screw conveyors, centrifuge and mining parts, severe slurry wear. Specify the substrate, wear mechanism, corrosive medium, powder size and proposed spray-and-fuse or surfacing route. The powder name alone does not define coating hardness, fusion conditions or machining allowance; agree these against the supplier specification.
Key characteristics
- HRC 60+ matrix with hard WC particles (HV 2000+)
- extreme abrasion with tough Ni matrix
Typical applications
- Fan blades
- screw conveyors
- centrifuge and mining parts
- severe slurry wear
Grade names and equivalents
Technical properties
Typical values are for reference only. Final chemistry, mechanical properties, heat treatment, dimensions, inspection, and documentation are confirmed against the applicable specification and MTC/COA before order acceptance.
Chemical composition
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Ni-base matrix | 65 | wt% | Typical value |
| WC | 35 | wt% | Typical value |
| Cr | 10 | wt% | Typical value |
| B | 2.5 | wt% | Typical value |
| Si | 3 | wt% | Typical value |
| C | 0.5 | wt% | Typical value |
Mechanical properties
| Property | Value | Unit | Condition / standard |
|---|---|---|---|
| Hardness | 60+ HRC (matrix) | HRC | As fused |
| WC hardness | 2000-2500 | HV | Particles |
Specialty Alloys & Welding Materials