Specialty alloy grades
Start with the material system, compare grades, then check the required performance, product form, process and application.
Drill-Pipe Hardbanding Wire
Request hardbanding wire with the tool-joint material, deposition procedure, application requirements and inspection criteria.
ER80S-Ni1 Low-Temperature Wire
Nickel-bearing low-alloy steel welding wire for joints where low-temperature toughness is a specified requirement.
View technical dataK20590ER80S-B2 (1.25Cr-0.5Mo) Wire
Chromium-molybdenum steel welding wire for compatible heat-resistant steel joints with controlled preheat and post-weld heat treatment.
D256 Austenitic Manganese Hardfacing
Austenitic manganese hardfacing consumable for impact-dominated wear where work hardening is part of the intended response.
ER70S-6 Carbon Steel Wire
Carbon steel welding wire with manganese and silicon deoxidizers for general fabrication.
View technical dataS308LER308L Stainless Wire
Low-carbon austenitic stainless steel welding wire for joining compatible stainless grades.
316L Stainless Steel Powder
Request 316L stainless steel powder against your process, particle-size distribution, chemistry limits, test methods and lot requirements.
ER80S-Ni3 (3.5Ni) Low-Temperature Wire
Nickel-bearing low-alloy steel welding wire for specified low-temperature steel joints; it remains iron-base despite its nickel addition.
View technical dataK30960ER62-B3 (2.25Cr-1Mo) Wire
Chromium-molybdenum steel welding wire for compatible pressure-equipment joints requiring a defined welding and heat-treatment procedure.
D642 High-Chromium Hardfacing
Chromium-bearing iron-base hardfacing consumable for specified metal-to-metal wear and erosion conditions.
E7018 Low-Hydrogen Electrode
Low-hydrogen covered electrode for compatible carbon and low-alloy steel fabrication.
View technical dataS309LER309L Stainless Wire
Austenitic stainless steel welding wire commonly considered for dissimilar stainless-to-steel joints and buffer layers.
17-4PH Stainless Steel Powder
Precipitation-hardening stainless steel powder for components requiring strength after an appropriate heat-treatment route.
ER90S-B9 (T91/P91) Wire
Modified chromium-molybdenum steel welding wire for compatible creep-resistant steel joints with controlled thermal processing.
D667 High-Chromium Cast-Iron Hardfacing
Chromium-carbide-bearing iron-base hardfacing consumable for abrasive wear with limited impact loading.
E71T-1 Flux-Cored Wire
Flux-cored welding wire for productive carbon-steel fabrication with the shielding and positional classification specified.
View technical dataw-er316lER316L Stainless Steel Welding Wire
Prepare an ER316L welding wire enquiry with the process, diameter or rod dimensions, packaging and lot certificate requirements.
D688 High-Chromium Hardfacing
Higher-hardness chromium-bearing iron-base hardfacing consumable for abrasion-dominated service.
EL8/H08A Submerged-Arc Wire + Flux
Submerged-arc welding wire supplied with a compatible flux selection for carbon-steel fabrication.
View technical dataS347ER347 Stainless Wire
Niobium-stabilized stainless steel welding wire for compatible stabilized stainless joints and specified elevated-temperature service.
ER310 Stainless Wire
High-chromium, high-nickel stainless steel welding wire for compatible heat-resistant joints.
D507 Valve Seat Hardfacing
Iron-base hardfacing consumable for valve-seat and other metal-to-metal wear applications.
ER2209 Duplex Stainless Steel Welding Wire
Prepare an ER2209 solid-wire or bare-rod enquiry with the AWS classification, welding process, diameter and lot-document requirements.
D322 Tool-Steel Hardfacing
Tool-steel-type iron-base hardfacing consumable for wear surfaces requiring a balance of hot hardness and toughness.
Specialty Alloys & Welding Materials